Introduction
stafihubd is a command line client for StaFiHub. StaFiHub users can use stafihubd to send transactions and query the blockchain data.
The default working directory for the stafihubd is $HOME/.stafihub, which is mainly used to save configuration files and data. The StaFiHub key data is saved in the working directory of stafihub. You can also specify the stafihub working directory by —home.
The stafihub node provides a RPC interface, transactions and query requests are sent to the process listening to it. The default rpc address the stafihub is connected to is tcp://localhost:26657, it can also be specified by —node.
Global Flags
GET Commands
All GET commands has the following global flags:
| Name,shortland | Type | Required | Default Value | Description |
|---|---|---|---|---|
| —chain-id | string | Chain ID of tendermint node | ||
| —home | string | $HOME/.stafihub | Directory for config and data | |
| —trace | string | Print out full stack trace on errors |
POST Commands
All POST commands have the following global flags:
| Name,shortland | Type | Required | Default Value | Description |
|---|---|---|---|---|
| —account-number | int | 0 | AccountNumber to sign the tx | |
| —broadcast-mode | string | sync | Transaction broadcasting mode (sync | |
| —dry-run | bool | false | Ignore the —gas flag and perform a simulation of a transaction, but don’t broadcast it | |
| —fee-account | string | Fee account pays fees for the transaction instead of deducting from the signer | ||
| —fees | string | Fees to pay along with transaction | ||
| —from | string | Name of private key with which to sign | ||
| —gas | string | 200000 | Gas limit to set per-transaction; set to “simulate” to calculate required gas automatically | |
| —gas-adjustment | 1 | Ignore the —gas flag and perform a simulation of a transaction, but don’t broadcast it | ||
| —gas-prices | string | Gas prices in decimal format to determine the transaction fee | ||
| —generate-only | bool | false | Build an unsigned transaction and write it to STDOUT | |
| —help, -h | string | Print help message | ||
| —keyring-backend | string | os | Select keyring’s backend | |
| —keyring-dir | string | The client Keyring directory; if omitted, the default ‘home’ directory will be used | ||
| —ledger | bool | Note to add a description to the transaction (previously —memo) | ||
| —node | string | tcp://localhost:26657 | : to tendermint rpc interface for this chain | |
| —note | string | Note to add a description to the transaction (previously —memo) | ||
| —offline | string | false | Offline mode (does not allow any online functionality) | |
| -o, —output | string | json | Output format (text) | |
| —sequence | uint | 0 | The sequence number of the signing account (offline mode only) | |
| —sign-mode | string | Choose sign mode (direct | ||
| —timeout-height | bool | Set a block timeout height to prevent the tx from being committed past a certain height | ||
| —yes | bool | true | Skip tx broadcasting prompt confirmation | |
| —chain-id | string | Chain ID of tendermint node | ||
| —home | string | Directory for config and data (default “$HOME/.stafihubd”) | ||
| —trace | string | Print out full stack trace on errors |
Bank
Bank module allows you to manage assets in your local accounts.
Available Commands
| Name | Description |
|---|---|
| balances | Query for account balances by address |
| total | Query the total supply of coins of the chain |
| send | Create and/or sign and broadcast a MsgSend transaction |
stafihubd query bank balances
stafihubd query bank balances [address] [flags]Flags:
-h, --help: Help for coin-type.--denom: The specific balance denomination to query for.--count-total: Count total number of records in all balances to query for.
stafihubd query bank total
stafihubd query bank total [flags]Flags:
-h, --help: Help for coin-type.--denom: The specific balance denomination to query for.
stafihubd tx bank send
stafihubd tx bank send [from_key_or_address] [to_address] [amount] [flags]Flags:
-h, --help: Help for coin-type.
Debug
A tool for simple debugging.
Available Commands
| Name | Description |
|---|---|
| addr | Convert an address between hex and bech32 |
| pubkey | Decode a pubkey from proto JSON |
| raw-bytes | Convert raw bytes output (eg. [10 21 13 127]) to hex |
stafihubd debug addr
stafihubd debug addr stafi1m3uxpmweefjdj9kcy3aserws5ggkjsyv50rsh4returns
Address: [220 120 96 237 217 202 100 217 22 216 36 123 12 141 208 162 17 105 64 140]
Address (hex): DC7860EDD9CA64D916D8247B0C8DD0A21169408C
Bech32 Acc: stafi1m3uxpmweefjdj9kcy3aserws5ggkjsyv50rsh4
Bech32 Val: stafivaloper1m3uxpmweefjdj9kcy3aserws5ggkjsyvv5uecustafihubd debug addr
stafihubd debug addr stafi1m3uxpmweefjdj9kcy3aserws5ggkjsyv50rsh4returns
Address: [220 120 96 237 217 202 100 217 22 216 36 123 12 141 208 162 17 105 64 140]
Address (hex): DC7860EDD9CA64D916D8247B0C8DD0A21169408C
Bech32 Acc: stafi1m3uxpmweefjdj9kcy3aserws5ggkjsyv50rsh4
Bech32 Val: stafivaloper1m3uxpmweefjdj9kcy3aserws5ggkjsyvv5uecustafihubd debug addr
stafihubd debug addr stafi1m3uxpmweefjdj9kcy3aserws5ggkjsyv50rsh4returns
Address: [220 120 96 237 217 202 100 217 22 216 36 123 12 141 208 162 17 105 64 140]
Address (hex): DC7860EDD9CA64D916D8247B0C8DD0A21169408C
Bech32 Acc: stafi1m3uxpmweefjdj9kcy3aserws5ggkjsyv50rsh4
Bech32 Val: stafivaloper1m3uxpmweefjdj9kcy3aserws5ggkjsyvv5uecustafihubd debug pubkey
stafihubd debug pubkey '{"@type":"/cosmos.crypto.secp256k1.PubKey","key":"AurroA7jvfPd1AadmmOvWM2rJSwipXfRf8yD6pLbA2DJ"}'returns
Address: 620B7D22188F8BDBA267DAF89A857081092A6A6C
PubKey Hex: 02eaeba00ee3bdf3ddd4069d9a63af58cdab252c22a577d17fcc83ea92db0360c9stafihubd debug raw-bytes
stafihubd debug raw-bytes '[72 101 108 108 111 44 32 112 108 97 121 103 114 111 117 110 100]'returns
48656C6C6F2C20706C617967726F756E64Keys
Keys allows you to manage your local tendermint keystore (wallets) for StaFiHub.
Available Commands
| Name | Description |
|---|---|
| add | Add an encrypted private key (either newly generated or recovered), encrypt it, and save to disk |
| delete | Delete the given key |
| export | Export private keys |
| import | Import private keys into the local keybase |
| list | List all keys |
| migrate | Migrate keys from the legacy (db-based) Keybase |
| mnemonic | Compute the bip39 mnemonic for some input entropy |
| parse | Parse address from hex to bech32 and vice versa |
| show | Retrieve key information by name or address |
stafihubd keys add
Derive a new private key and encrypt to disk.
stafihubd keys add <key-name> [flags]Flags:
--multisig: Construct and store a multisig public key.--multisig-threshold: K out of N required signatures.--nosort: Keys passed to--multisigare taken in the order they’re supplied.--pubkey: Parse a public key in bech32 format and save it to disk.--interactive: Interactively prompt user for BIP39 passphrase and mnemonic.--ledger: Store a local reference to a private key on a Ledger device.--recover: Provide seed phrase to recover existing key instead of creating.--no-backup: Don’t print out seed phrase (if others are watching the terminal) .--dry-run: Perform action, but don’t add key to local keystore.--hd-path: Manual HD Path derivation (overrides BIP44 config).--coin-type: coin type number for HD derivation.--account: Account number for HD derivation.--index: Address index number for HD derivation.--algo: Key signing algorithm to generate keys.
Create a new key
stafihubd keys add MyKeyEnter and repeat the password, at least 8 characters, then you will get a new key.
warning: write the seed phrase in a safe place! It is the only way to recover your account if you ever forget your password.
Recover an existing key from seed phrase
If you forget your password or lose your key, or you wanna use your key in another place, you can recover your key by your seed phrase.
stafihubd keys add MyKey --recoverYou’ll be asked to enter and repeat the new password for your key, and enter the seed phrase. Then you get your key back.
Enter a passphrase for your key:
Repeat the passphrase:
Enter your recovery seed phrase:Create a multisig key
The following example creates a multisig key with 3 sub-keys, and specify the minimum number of signatures as 2. The tx could be broadcast only when the number of signatures is greater than or equal to 2.
stafihubd keys add <multisig-keyname> --multisig-threshold=2 --multisig=<signer-keyname-1>,<signer-keyname-2>,<signer-keyname-3>tip <signer-keyname> can be the type oflocal/offline/ledger, but not multi type.
If you don’t have all the permission of sub-keys, you can ask for the pubkeys to create the offline keys first, then you will be able to create the multisig key.
Offline key can be created by stafihubd keys add --pubkey.
How to use multisig key to sign and broadcast a transaction, please refer to multisign.
stafihubd keys delete
Delete a local key by the given name.
stafihubd keys delete <key-name> [flags]Flags:
--force, -f: Remove the key unconditionally without asking for the passphrase.--yes, -y: Skip confirmation prompt when deleting offline or ledger key references.
Delete a local key
stafihubd keys delete MyKeystafihubd keys export
Export the keystore of a key to a json file
stafihubd keys export <key-name> [flags]Export keystore
stafihubd keys export Mykey --output-file=<path-to-keystore>stafihubd keys import
stafihubd keys import <name> <keyfile> [flags]stafihubd keys list
stafihubd keys liststafihubd keys migrate
stafihubd keys migrate [flags]stafihubd keys mnemonic
Create a bip39 mnemonic, sometimes called a seed phrase, by reading from the system entropy. To pass your own entropy, use unsafe-entropy mode.
stafihubd keys mnemonic [flags]Create a bip39 mnemonic
stafihubd keys mnemonicYou’ll get a bip39 mnemonic with 24 words, e.g.:
beauty entire blue tape ordinary fix rotate learn smart tiger dolphin cycle cigar dish alcohol slab bachelor vital design consider paper panther mad eternalstafihubd keys parse
Convert and print to stdout key addresses and fingerprints from hexadecimal into bech32 cosmos prefixed format and vice versa.
Convert and print to stdout key addresses and fingerprints
stafihubd keys parse <hex-or-bech32-address> [flags]stafihubd keys show
Get details of a local key.
stafihubd keys show <key-name> [flags]Get details of a local key
stafihubd keys show MyKeyThe following infos will be shown:
- name: Mykey
type: local
address: iaa1tulwx2hwz4dv8te6cflhda64dn0984harlzegw
pubkey: iap1addwnpepq24rufap6u0sysqcpgsfzqhw3x8nfkhqhtmpgqt0369rlyqcg0vkgwzc4k0
mnemonic: ""
threshold: 0
pubkeys: []Get validator operator address
If an address has been bonded to be a validator operator (which the address you used to create a validator), then you can use —bech val to get the operator’s address prefixed by iva and the pubkey prefixed by ivp:
stafihubd keys show MyKey --bech valExample Output:
- name: Mykey
type: local
address: iva1tulwx2hwz4dv8te6cflhda64dn0984hakwgk4f
pubkey: ivp1addwnpepq24rufap6u0sysqcpgsfzqhw3x8nfkhqhtmpgqt0369rlyqcg0vkgd8e6zy
mnemonic: ""
threshold: 0
pubkeys: []Gov
This module provides the basic functionalities for Governance.
| Name | Description |
|---|---|
| proposal | Query details of a single proposal |
| proposals | Query proposals with optional filter |
| vote | Query details of a single vote |
| votes | Query votes on a proposal |
| deposit | Query details of a deposit |
| deposits | Query deposits on a proposal |
| tally | Get the tally of a proposal vote |
| param | Query the parameters (voting) |
| params | Query the parameters of the governance process |
| proposer | Query which address proposed a proposal with a given ID. |
| submit-proposal | Submit a proposal along with an initial deposit |
| vote | Vote for an active proposal, options: yes/no/no_with_veto/abstain |
stafihubd query gov proposal
Query details of a proposal.
stafihubd query gov proposal [proposal-id] [flags]Query a proposal
stafihubd query gov proposal <proposal-id>stafihubd query gov proposals
Query proposals with optional filter.
stafihubd query gov proposals [flags]Query all proposals
stafihubd query gov proposalsQuery proposals by conditions
stafihubd query gov proposals --limit=3 --status=Passed --depositor=<iaa...>stafihubd query gov vote
Query details of a single vote.
stafihubd query gov vote [proposal-id] [voter-addr] [flags]stafihubd query gov vote
Query details of a single vote.
stafihubd query gov vote [proposal-id] [voter-addr] [flags]stafihubd query gov deposit
Query details for a single proposal deposit on a proposal by its identifier.
stafihubd query gov deposit [proposal-id] [depositer-addr] [flags]Query a deposit of a proposal
stafihubd query gov deposit <proposal-id> <iaa...>Ledger
Ledger module allow users to liquidity stake/unstake rTokens and rToken relayers to send proposals.
Way to Stake/Unstake rToken
- Stake: Take rATOM as an example, only a common transfer on Cosmos Hub is needed to get rATOM. By sending an amount of ATOM to the given pool accounts of rATOM, rToken relayers will receive the corresponding event and send an execute-bond-proposal to StafiHub which will mint rATOM for the from account.
- Unstake: liquidity-unbond is the rpc interface for rToken holders to redeem their origin tokens.
Available Query Commands
| Name | Description |
|---|---|
| account-unbond | Query AccountUnbond |
| bond-record | Query BondRecord |
| bond-pools | Query bonded-pools |
| chain-era | Query getChainEra |
| era-exchange-rate | Query EraExchangeRate by a given denom and era |
| era-exchange-rates | Query EraExchangeRatesByDenom |
| era-unbond-limit | Query getEraUnbondLimit |
| exchange-rate | Show ExchangeRate for a given denom |
| exchange-rate-list | List all ExchangeRate |
| pool-detail | Query subaccounts and threshold of a pool |
| pool-unbond | Query unbonds by a given pool |
| protocol-fee-receiver | Query protocol fee receiver |
| relay-fee-receiver | Query relay fee receiver |
| staking-reward-commission | Query staking reward commission |
| total-protocol-fee | Query total protocol fee |
| unbond-commission | Query getUnbondCommission |
| unbond-relay-fee | Query getUnbondRelayFee |
stafihubd query ledger account-unbond
stafihubd query ledger account-unbond [denom] [unbonder] [flags]stafihubd query ledger bond-record
stafihubd query ledger bond-record [denom] [txhash] [flags]stafihubd query ledger bonded-pools
stafihubd query ledger bonded-pools [denom] [flags]stafihubd query ledger chain-era
stafihubd query ledger chain-era [denom] [flags]stafihubd query ledger era-exchange-rate
stafihubd query ledger era-exchange-rate [denom] [era] [flags]stafihubd query ledger era-exchange-rates
stafihubd query ledger era-exchange-rates [denom] [flags]stafihubd query ledger era-unbond-limit
stafihubd query ledger era-unbond-limit [denom] [flags]stafihubd query ledger exchange-rate
stafihubd query ledger exchange-rate [denom] [flags]stafihubd query ledger exchange-rate-list
stafihubd query ledger exchange-rate-list [flags]stafihubd query ledger pool-detail
stafihubd query ledger pool-detail [denom] [pool] [flags]stafihubd query ledger pool-unbond
stafihubd query ledger pool-unbond [denom] [pool] [era] [flags]stafihubd query ledger protocol-fee-receiver
stafihubd query ledger protocol-fee-receiver [flags]stafihubd query ledger relay-fee-receiver
stafihubd query ledger relay-fee-receiver [denom] [flags]stafihubd query ledger staking-reward-commission
stafihubd query ledger staking-reward-commission [denom] [flags]stafihubd query ledger total-protocol-fee
stafihubd query ledger total-protocol-fee [flags]stafihubd query ledger unbond-commission
stafihubd query ledger unbond-commission [denom] [flags]stafihubd query ledger unbond-relay-fee
stafihubd query ledger unbond-relay-fee [denom] [flags]rBank
rBank module allows admin to add new denom and its metadata and address-prefix.
Available Commands
| Name | Description |
|---|---|
| address-prefix | Query address prefix of denom |
| params | Query BondRecord |
| add-denom | Add metadata and addressPrefix |
stafihubd query rbank address-prefix
Query the address-prefix of a specific denomination.
stafihubd query rbank address-prefix [denom] [flags]stafihubd query rbank params
Query the genesis params of rbank module.
stafihubd query rbank params [flags]stafihubd tx rbank add-denom
Add a new denom, and its metadata and address-prefix.
stafihubd tx rbank add-denom [address-prefix] [metadata-path] [flags]Relayers
Relayers module manager kinds of relayers.
Available Commands
| Name | Description |
|---|---|
| relayers | Query relayers |
| threshold | Query threshold |
| add-relayers | Add new relayers |
| delete-relayers | Delete a relayer |
| set-threshold | Set threshold |
stafihubd query relayers relayers
Query the relayers of a specific denomination and arena.
stafihubd query relayers relayers [arena] [denom] [flags]stafihubd query relayers threshold
Query the threshold of a specific denomination and arena.
stafihubd query relayers threshold [arena] [denom] [flags]stafihubd tx relayers add-relayers
Add relayers for a specific denomination and arena.
stafihubd tx relayers add-relayers [arena] [denom] [addresses] [flags]stafihubd tx relayers delete-relayer
Delete a relayer for a specific denomination and arena.
stafihubd tx relayers delete-relayer [arena] [denom] [address] [flags]stafihubd tx relayers set-threshold
Set the threshold for a specific denomination and arena, the default value is 0 if unset.
stafihubd tx relayers set-threshold [arena] [denom] [value] [flags]rVote
Available Commands
| Name | Description |
|---|---|
| proposal | Query Proposal |
| proposal-life | Query ProposalLife |
| set-proposal-life | Set ProposalLife |
stafihubd query rvote proposal
Query the proposal of a specific prop-id.
stafihubd query rvote proposal [prop-id] [flags]stafihubd query rvote proposal-life
Query ProposalLife, ProposalLife indicates how long a proposal can be voted on.
stafihubd query rvote proposal-life [flags]stafihubd tx rvote set-proposal-life
Add a new denom, and its metadata and address-prefix.
stafihubd tx rvote set-proposal-life [proposal-life] [flags]staking
Staking module provides a set of subcommands to query staking state and send staking transactions.
Available Commands
| Name | Description |
|---|---|
| validator | Query a validator |
| validators | Query for all validators |
| delegations | Query a delegation based on address and validator address |
| delegations-to | Query all delegations to one validator |
| unbonding-delegation | Query an unbonding-delegation record based on delegator and validator address |
| unbonding-delegations | Query all unbonding-delegations records for one delegator |
| unbonding-delegations-from | |
| redelegation-from | Query all outgoing redelegatations from a validator |
| redelegation | Query a redelegation record based on delegator and a source and destination validator address |
| redelegations | Query all redelegations records for one delegator |
| pool | Query the current staking pool values |
| params | Query the current staking parameters information |
| historical-info | Query historical info at given height |
| create-validator | Create new validator initialized with a self-delegation to it |
| edit-validator | Edit existing validator account |
| delegate | Delegate liquid tokens to an validator |
| unbond | Unbond shares from a validator |
| redelegate | Redelegate illiquid tokens from one validator to another |
stafihubd query staking validator
Query a validator by validator address
stafihubd query staking validator <iva...>stafihubd query staking validators
Query all validators
stafihubd query staking validatorsstafihubd query staking delegation
Query a delegation based on delegator address and validator address.
stafihubd query staking delegation [delegator-addr] [validator-addr]Query a delegation
stafihubd query staking delegation <iaa...> <iva...>Example Output:
Delegation:
Delegator: iaa13lcwnxpyn2ea3skzmek64vvnp97jsk8qrcezvm
Validator: iva15grv3xg3ekxh9xrf79zd0w077krgv5xfzzunhs
Shares: 1.0000000000000000000000000000
Height: 26stafihubd query staking delegations
Query all delegations delegated from one delegator.
stafihubd query staking delegations [delegator-address] [flags]Query all delegations of a delegator
stafihubd query staking delegations <iaa...>stafihubd query staking delegations-to
Query all delegations to one validator.
stafihubd query staking delegations-to [validator-address] [flags]Query all delegations to one validator
stafihubd query staking delegations-to <iva...>Example Output:
Delegation:
Delegator: iaa13lcwnxpyn2ea3skzmek64vvnp97jsk8qrcezvm
Validator: iva1yclscskdtqu9rgufgws293wxp3njsesxxlnhmh
Shares: 100.0000000000000000000000000000
Height: 0
Delegation:
Delegator: iaa1td4xnefkthfs6jg469x33shzf578fed6n7k7ua
Validator: iva1yclscskdtqu9rgufgws293wxp3njsesxxlnhmh
Shares: 1.0000000000000000000000000000
Height: 26stafihubd query staking unbonding-delegation
Query an unbonding-delegation record based on delegator and validator address.
stafihubd query staking unbonding-delegation [delegator-addr] [validator-addr] [flags]Query an unbonding delegation record
stafihubd query staking unbonding-delegation <iaa...> <iva...>stafihubd query staking unbonding-delegations
Query all unbonding delegations records of a delegator
stafihubd query staking unbonding-delegations <iaa...>stafihubd query staking unbonding-delegations-from
Query all unbonding delegations from a validator
stafihubd query staking unbonding-delegations-from <iva...>stafihubd query staking redelegations-from
Query all outgoing redelegations of a validator
stafihubd query staking redelegations-from [validator-address] [flags]Query all outgoing redelegatations of a validator
stafihubd query staking redelegations-from <iva...>stafihubd query staking redelegation
Query a redelegation record based on delegator and source validator address and destination validator address.
stafihubd query staking redelegation [delegator-addr] [src-validator-addr] [dst-validator-addr] [flags]Query a redelegation record
stafihubd query staking redelegation <iaa...> <iva...> <iva...>stafihubd query staking redelegations
Query all redelegations records of a delegator
stafihubd query staking redelegations <iaa...>stafihubd query staking pool
Query the current staking pool values
stafihubd query staking poolExample Output:
Pool:
Loose Tokens: 1409493892.759816067399143966
Bonded Tokens: 590526409.65743521209068061
Token Supply: 2000020302.417251279489824576
Bonded Ratio: 0.2952602076stafihubd query staking params
Query the current staking parameters information
stafihubd query staking paramsstafihubd query staking historical-info
Query historical info at given height
stafihubd query staking historical-info <height>stafihubd tx staking create-validator
Send a transaction to apply to be a validator and delegate a certain amount of fis to it.
stafihubd tx staking create-validator [flags]Create a validator
stafihubd tx staking create-validator --chain-id=stafihub --from=<key-name> --fees=0.3fis --pubkey=<validator-pubKey> --commission-rate=0.1 --amount=100fis --moniker=<validator-name>stafihubd tx staking edit-validator
Edit an existing validator’s settings, such as commission rate, name, etc.
stafihubd tx staking edit-validator [flags]Flags:
--amount: Required, amount of coins to bond.--commission-rate: Required, the initial commission rate percentage.--commission-max-rate: The maximum commission rate percentage.--commission-max-change-rate: The maximum commission change rate percentage (per day).--min-self-delegation: The minimum self delegation required on the validator.--details: Optional details.--genesis-format: Export the transaction in gen-tx format; it implies —generate-only.--identity: Optional identity signature (ex. UPort or Keybase).--ip: Node’s public IP. It takes effect only when used in combination with.--node-id: The node’s ID.--moniker: Validator name.--pubkey: Go-Amino encoded hex PubKey of the validator. For Ed25519 the go-amino prepend hex is 1624de6220.--website: Optional website.--security-contact: The validator’s (optional) security contact email.
Edit validator information
stafihubd tx staking edit-validator --from=<key-name> --chain-id=stafihub --fees=0.3fis --commission-rate=0.10 --moniker=<validator-name>Upload validator avatar
Please refer to How to upload my validator’s logo to the Explorers
stafihubd tx staking delegateDelegate tokens to a validator.
stafihubd tx staking delegate [validator-addr] [amount] [flags]
stafihubd tx staking delegate <iva...> <amount> --chain-id=stafihub --from=<key-name> --fees=0.3fisstafihubd tx staking unbond
Unbond tokens from a validator.
stafihubd tx staking unbond [validator-addr] [amount] [flags]Unbond some tokens from a validator
stafihubd tx staking unbond <iva...> 10fis --from=<key-name> --chain-id=stafihub --fees=0.3fisstafihubd tx staking redelegate
Transfer delegation from one validator to another.
tips: There is no unbonding time during the redelegation, so you will not miss the rewards. But you can only redelegate once per validator, until a period (= unbonding time) exceed.
stafihubd tx staking redelegate [src-validator-addr] [dst-validator-addr] [amount] [flags]Redelegate some tokens to another validator
stafihubd tx staking redelegate <iva...> <iva...> 10fis --chain-id=stafihub --from=<key-name> --fees=0.3fis